Home > products > Multistage High Pressure Pumps > DF \ DY 12-50 single-suction Horizontal Multistage Pump High Pressure

DF \ DY 12-50 single-suction Horizontal Multistage Pump High Pressure

Category:
Multistage High Pressure Pumps
Price:
USD 1000 Unit
Specifications
Material:
Cast Iron 、stainless Steel、etc
Color:
Pink Or Required
Port:
Tianjin、 Beijing
Flow:
7.5 ~ 15 M3/h
Head:
93 ~ 756 M
Motor Power:
11 ~ 75 Kw
High Light:

high pressure multistage pump

,

high pressure multistage centrifugal pumps

Introduction

DF DY 12-50 single-suction Horizontal Multistage Pump High Pressure
 
 
Description
 

  • D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
  • Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
  • Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
  • Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

 
Features

  •  advanced hydraulic model, high efficiency, wide range of performance.
  •  pump running smoothly, low noise.
  •  seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  •  the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

 
Model Significance


Such as D600-60 x 6,   DF600-60×6,   DY600-60×6
D -  multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6

 
Performance
 
                                                          D(DF/DY)12-50 Performance Parameter 
 

LevelFlow QHeadSpeedηshaft powerMotor ImpellerPumpMoter
Hn(%)NNPSHrDiameterweightweight
(m)(r/min) (kw)(m)D(kg)(kg)
m³/hL/s    power(kw)Type (mm)  

 

2  1082950 5.811Y160M1-2 198142117
  100 7.6 
  93 8.3 
3  162 8.818.5Y160L-2 156147
  150 11.3 
  139.5 16.6 
4  216 11.722Y180M-2 170180
  200 15.1 
  186 16.6 
5  270 14.630Y200L1-2 183.6240
  250 18.9 
  232.5 20.7 
6  324 17.530Y200L1-2 197.2240
7.52.0830037.822.72
  279 24.8 
7  378 20.437Y200L2-2 210.9260
12.53.473504526.52
  325.5 29 
8  432 23.345Y225M-2 224.5325
154.1740045.930.32.5
  372 33.1 
9  486 26.345Y225M-2 238.1325
  450 34 
  418.5 37.3 
10  540 29.255Y250M-2 251.7395
  500 37.8 
  465 41.4 
11  594 32.155Y250M-2 265.3395
  550 41.6 
  511.5 45.5 
12  648 3575Y280S-2 279500
  600 45.4 
  558 50 
13  702 37.975Y280S-2 293500
  650 49.2 
  604.5 54.2 
14  756 40.875Y280S-2 307500
  700 52.9 
  651 58.3 

 
 

Send RFQ
Stock:
MOQ:
1 unit