I-1B series Centrifugal Slurry Pump for printing and dyeing

I-1B series Centrifugal Slurry Pump for printing and dyeing

I-1B thick slurry pump overview

The I-1B series of thick slurry pumps are single screw type rotary pumps which utilize the rotation of the screw of the eccentric single helix in the double screw bushing so that the thick slurry is moved from the suction port to the discharge port along the spiral groove to achieve pump delivery Features

I-1B thick slurry pump structure material type

I-1B type: shell cast iron, transmission parts for the general steel, suitable for general neutral thick slurry transport.

I-1B type: transmission parts (spindle, screw and shaft) is made of stainless steel, suitable for general slightly acidic, alkaline slurry delivery.

Type I-1B: drive and angle of the slurry pump shell are made of stainless steel, suitable for food, pharmaceutical and corrosive slurry delivery.

Rubber bushings are generally wear-resistant rubber, food with rubber and oil-resistant rubber for the user to choose.

Transmission mode with a direct drive motor and pump shaft, the motor by the reducer and pump direct drive and motor by the triangular pulley and pump shaft drive for users to buy.

Equipped with the motor are generally closed, explosion-proof and electromagnetic speed control motor.

I-1B thick slurry pump use range

1. Can transport high concentration and high viscosity (<10000PaS) and suspended particles containing particles.
2. Transport flow stability, no overcurrent, pulsation and stirring, shear slurry phenomenon.
3. The discharge pressure has nothing to do with the speed, low flow can also maintain a high discharge pressure.
4. Flow rate is proportional to the speed, through the transmission mechanism or high-speed motor can achieve flow adjustment.
5. Self-priming ability, the liquid flow from the direction of rotation of the pump to change, apply to the pipeline to be anti-positive flushing occasions.
6. Smooth operation, vibration, noise.
7. Simple structure, disassembly, easy maintenance.

Screw pump (thick pump) is a new type of liquid transport machinery, with a simple structure, safe and reliable work, easy maintenance and use, the liquid continuous uniform pressure stability and so on. I plant the production of thick slurry pump where the metal parts of contact materials are made of high-quality acid and stainless steel production, liner with non-toxic and tasteless rubber, the working temperature of up to 120 ℃, can be used for conveying food slurry and viscosity 10000 pound card A solution slurry containing a solid particle or a mass, and a corrosive medium of the suspension. Widely used in food, metallurgy, chemical, printing and dyeing, paper, ceramics and other industrial sectors.

I-1B thick slurry pump performance parameters

Examples of applications

1. This series of thick slurry pump parts are selected high-quality stainless steel screw bush with the hardness of rubber production, which is the most suitable for the food processing industry and pharmaceutical, chemical and other industries. E.g
2. sugar factory molasses, sugar juice, residue, sugar beet residue delivery;
3. canned food, food factory milk powder, starch, honey, coffee, milk, butter, edible oil, all kinds of vitamin solution, maltose, tomato sauce jam, mayonnaise, ice cream and other loading and transportation;
4. brewing wineries of alcoholic beverages, spices, fermentation broth feed ingredients. Filter press loading of food waste residue;
5. fish processing plant cod liver oil, fish oil, fish pine, fish residue transport;
6. fruit processing plants Sugar juice, fruit juice delivery, citrus, fruit smashed. Grape machine feeding, etc.:
7. grain and oil processing plant cooking oil, rice and corn starch and other fillers and auxiliary delivery;
8. meat processing plants, slaughter; grease, meat oil, packing, waste liquid delivery;
9. pharmaceutical factory: a variety of vitamin liquid, liquid, emulsion feeding transport. Suspension, salt water, salt sludge, slag and other transportation;
10. the chemical industry: acid, lye transport, all kinds of suspensions, grease, glue, all kinds of chemical dyes, paints, all kinds of adhesives, ointment, paste feed, ingredients and transportation, especially the general centrifugal The pump can not transport a variety of high-viscosity materials, or with solid particles and materials can pump the pump;
11. Dosing of printing inks;
12. Pulp and ink delivery of paper mills;
13. Oil chemical plant oil products, oil, waste sludge transport;
14. Acetylene station transport of calcium carbide sludge;
15. construction industry dyspsia mortar, lime milk, mortar, cement slurry;
16. Can be used and pump pumping, feed processing and transportation and loading of the class;
17. Widely used in industrial and domestic sewage, sludge treatment, sewage usually contains a lot of suspended solids have a certain degree of corrosion and viscosity, often containing solid particles, solid and the use of thick slurry pump is appropriate;
18. Transport of contaminated water, contaminants and other materials for atomic energy stations;
19. Mine sewage, sludge. In addition, in the iron and steel industry, shipbuilding industry, ceramic industry, leather industry can use the water plant.

Fault and exclusion

Installation Notes

According to the pump's total drawings and instructions provided by the installation of the size of the casting base and determine the location of the anchor bolts, under normal circumstances should not change the direction of imports. The base surface should be leveled using the level, until the foundation of the cement after the solidification of the pump installed on the basis. Coaxiality of motor shaft and pump shaft. The two axes are offset by no more than ± 0.2 mm. If the axis does not coincide, it will produce vibration to make the bearing heat, or even damage the pump.

Pump suction and discharge pipes should have their own and the bracket, generally do not allow the pump to withstand the weight of the pipeline, the pump can be installed in the tank can not install the end of the valve, but should be installed in the suction pipe control valve and filter device to Anti-debris inhalation pump. When the pump is installed above the liquid level position, it should be installed at the end of the suction pipe end valve, and the bottom valve throat area should be larger than 50% of the cross section of the suction pipe.

Before the installation of the pump must be completely removed from the pipeline debris, such as: welding slag, metal shavings, etc., so as to avoid the pump was inhalation caused by accident.

Start

1. Expect the necessary wrenches and tools.
2. Check the base. Bearing and oil chamber without lubricants,
3. Check that the hollow shaft and shaft seal are appropriate. The packing gland can not be pressed too tightly.
4. Turn the jaws by hand or pipe clamp. Note that there is no foreign matter in the pump body noise and stuck phenomenon.If you should be cleared before driving
5. Fill the pump chamber with the material. Do not run on the friction
6. out of the gate valve
7. Turn on the motor.

Stop

1. Close the suction pipe valve.
2. Close the drain valve.
3. Stop the motor. When the pump is in the long-term stop operation, the pump chamber should be drained and rinsed with water or steam.

Running

1. Always check pump and motor bearing temperature rise. The maximum temperature should not exceed 75 ℃.
2. Timely fill the lubricating oil to ensure good bearing lubrication.
3. During operation, if abnormal noise or excessive vibration should be found immediately stop inspection.
4. When the flow is significantly reduced, indicating that the rubber village has been worn. Should be replaced after the new village sets of operation.

I-1B thick slurry pump structure description

1. Elbow take over
2. Straight
3. rubber tube
4. screw pump
5. Three-way pump
6. Asbestos packing
7. Packing gland
8. Around the axis
9. Hollow pump shaft
10. Pump seat
11. Pin pin
12. Coupling