Paper / Textile industry Chemical Centrifugal Pump 1450 r/min

All Products

Electric Centrifugal Pump (51)

Mission Centrifugal Pump (11)

Self Priming Centrifugal Pump (15)

Submersible Sewage Pump (16)

Multistage High Pressure Pumps (27)

Double Suction Split Case Pump (10)

Deep Well Submersible Pump (10)

Single Screw Pump (10)

Clean Water Pump (10)

Sand Suction Pump (10)

Inline Water Booster Pump (11)

Chemical Centrifugal Pump (19)

Certification

The quality of the product is very good

—— David

A trustworthy manufacturer Later will cooperate

—— Peter

The supplier will pick you up later

—— Lisa

: Large Image : Paper / Textile industry Chemical Centrifugal Pump 1450 r/min

Minimum Order Quantity:	1 set
Price:	Negotiation
Packaging Details:	Standard Export Wooden Case Or By Required
Delivery Time:	4 Weeks
Payment Terms:	D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability:	70/Month

Contact Now

Detailed Product Description

Flow:	11~100m³/h	Head:	16~80m
Speed:	2900, 1450 R/min	Power:	0.55~110KW
Import Diameter:	50~200mm	Maximum Working Pressure:	1.6Mpa
Applications:	Chemicals, Pharmaceuticals, Petroleum, Metallurgy, Smelting, Electricity, Electroplating, Dyes, Pesticides, Paper, Food, Textile And Other Industries	Color:	Green
High Light:	Chemical resistant pump , Horizontal centrifugal pump

Paper / Textile industry Chemical Centrifugal Pump 1450 r/min

IHF-type fluorine centrifugal pump ┃ fluorine plastic centrifugal pump start, run and stop:

IHF centrifugal pump should be filled before filling the pump filled with the delivery of liquid, no liquid start.
Close the outlet valve, turn on the power immediately after checking the pump steering must be the same as the pump steering arrows, is strictly prohibited reverse operation.
IHF centrifugal pump to reach the normal speed after starting, and then gradually open the outlet valve, and adjust to the required conditions put into operation. The pump can not work for more than 3 minutes while the valve is closed on the discharge line.
Shut down the valve should first be closed, and then cut off the power.

IHF-type fluorine centrifugal pump ┃ fluorine plastic centrifugal pump repair and maintenance:

Check the pump and motor regularly and replace the consumable parts.
Always pay attention to the bearing box filling high-quality calcium-based grease to ensure a good bearing lubrication state.
Long-term downtime is not used, in addition to the pump corrosive liquid put the net, but also pay attention to the parts and pump flow channel cleaning, and cut off the power.
The pump does not allow no-load operation.
If the solid particles in the medium, should be added to the pump inlet filter.