QS type Deep Well Submersible Pump , water filled submersible pump

QS type Deep Well Submersible Pump , water filled submersible pump

QS-type water - filled submersible pump product overview

QS-type water-filled submersible pump is a direct connection between the motor and the pump into the water work of the water lifting equipment, by the submersible pump, submersible motor two major components. QS-type water-filled submersible pumps are widely used in low-lift urban and farmland irrigation and drainage, sprinkler irrigation, shallow well water supply, industrial and civil water supply and drainage systems, and hilly and mountainous water diversion, low-lying areas of drainage, aquaculture and other places. This product implementation JB / T8092-96 "small submersible pump" standard.

QS type water - filled submersible pump working conditions

1. power: frequency 50Hz, voltage 380 volts (allowable deviation +5% -10%) of the three-phase AC power supply.
2. water: the general non-corrosive water, sand content of not more than 0.02%, PH value: 6.5-8.5. The extracted water temperature is not higher than 40.
3. the installation: the pump should be completely invasive water operation, the degree of water is not less than 0.5 meters, not more than 5 meters.

QS type filled with water submersible pump application range

1. irrigation and drainage of farmland, irrigation, sprinkler irrigation;
2. underground water, water tower water;
3. flood control flood;
4. the bottom of the ship drainage;
5. urban construction, industrial and mining water supply and drainage.

QS type water - filled submersible pump model significance

For example: QS15-65 / 5-5.5

QS - water submersible submersible pumps

15 - flow (m3 / h)

65-head (m)

5 - series

5.5 - power (kw)

Performance parameters of QS type water - filled submersible pump