100RV-SPGEM Vertical Sump Centrifugal Slurry Pump price For Conveying Abrasive
high pressure slurry pump
,mining slurry pump
100RV-SPGEM Vertical Centrifugal Slurry Pump for conveying abrasive
Specification of vertical sump pump
The SPGEM/SPRGEM heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pump can offer. The heavy duty cantilever design makes the SPGEM/SPRGEM sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
1.Flow: up to 1206 m3/h
2.Head: up to 54 m
3.Speed: 400 to 2200 rpm
4.Power:15 - 200 kw
5.Particle Size: max 64mm
Vertical sump pumps Sump pump Slurry pump
Description
- 100rv-spgem (R) mud pump is heavy, vertical, centrifugal can be immersed in the sink and pool, water tank work in the work. Used for conveying abrasive, large particles and high-density slurries without any shaft seal and seal water, even if the intake is not adequate for normal operation.
- The shell is made of wear-resistant metal, and the impeller is made of abrasion resistant metal or natural rubber, polyurethane and synthetic rubber. A lined rubber jacket immersed in a liquid. They are suitable for conveying non edge angle slurries. Depending on the fluid in the tank, different shaft lengths and straw sizes can be selected.
- V belt drive, direct drive and flexible coupling. Bearing oil. The pump with variable speed and optimum working condition has long service life, high running efficiency and meets many bad transportation conditions. High hardness, strong corrosion and high concentration liquid contain suspended solid particles, such as finished ore, ore ash, cinder, garbage, cement, soil, ore and so on.
Applications
- Sump drainage washdown
- Carbon transfer
- Monitoring
- metallurgy
- Mill sumps
PERFORMANCE
| Type | Allowable Mating Max. Power(Kw) | Range Of Performance | Impeller | |||||
| Capacity/Q | Head/m | Speed/rpm | Max Efficiency/% | No. of Vanes | Impeller Diameter/mm | |||
| m³/hr | L/S | |||||||
| 100RV-SP(R)GEM | 75 | 54-289 | 15-80.3 | 5-35 | 500-1200 | 56 | 5 | 370 |
Feature of Small Mining Centrifugal Long Shaft Vertical Submerslbie Slurry Pump
CANTILEVERED SHAFT
The standard SPGEM pumps feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.
HEAVY DUTY WET END
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.
COLUMN AND DISCHARGE PIPES
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.
VERSATILE DRIVE OPTIONS
SPGEM Slurry pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.
REMOVABLE STRAINERS
SPGEM Slurry pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.
"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.