Home > products > Electric Centrifugal Pump > G and GH Series sand suction pump , Multistage Centrifugal Pump

G and GH Series sand suction pump , Multistage Centrifugal Pump

Electric Centrifugal Pump
1000 USD/Set
Payment Method:
G / GH
Beijing, Tianjin
Yellow Or Other
Sealing Type:
Gland Seal, Mechanical Seal, Expeller Seal
Dredger Dredging, Sand Pumping Sand Pumping, Dredging The River
V-type V-belt Drive, Flexible Coupling Drive Etc.
High Light:

stainless steel centrifugal pump


industrial centrifugal pumps


G and GH Series sand suction pump , Multistage Centrifugal Pump




  • Structure: horizontal, single pump structure of the centrifugal pump. The pump body and the pump cover are clamped by special clamps, and the outlet direction of the pump can be located at any position of 360 degrees. The installation and use are convenient. The bearing assembly adopts a cylindrical structure, which is convenient for adjusting the clearance between the impeller and the pump body, and can be integrally dismantled during maintenance. The bearings are lubricated by grease.
  • Material: over flow parts are made of wear-resistant alloy iron with high hardness.
  • Use: pump is spacious, good cavitation performance, high efficiency, corrosion resistance. It is mainly used for the continuous transportation of strong abrasive materials because the particles are too large to be conveyed by the general slurry pump. The utility model is suitable for dredging, sucking sand and gravel, dredging river channels, sand excavation, metal smelting, blasting slag transportation, etc..
  • Seal form: packing seal, pay impeller seal, mechanical seal.
  • Driving mode: V V-belt drive, elastic coupling drive, gear reducer drive, hydraulic coupling drive, frequency conversion drive device, SCR Speed Regulation, etc.. It adopts various speed and variant modes to make the pump run at the optimum working condition. The utility model has the advantages of long service life and high operation benefit, and can meet the transportation condition of many kinds of bad conditions.​


  • This pump uses high chromium alloy material suitable for mining, dredging, river dredging, reclamation, transportation and other debris shield tunnel culvert pumping large stones occasions.
  • Type G(or GH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and river course, and other fields. Type GH are high head pumps.



G series gravel sand pump main parts numbers


005:Bearing Assembly
132:Intake Joint
Discharge Joint
130:Discharge Flange
Intake Flange
013:Cover Plate
041:Back Liner
135:Door Clamp Ring
134: Adapter Plate Clamp Ring
124:Volute Cover Seal






Pump Model Allowable
Max. Power
Clear Water Performance  
Capacity Q Head
H (m)
m3/h l/s
6/4D-G 60 36-250 10-70 5-52 600-1400 58 2.5-3.5  
8/6E-G 120 126-576 35-160 6-45 800-1400 60 3-4.5  
10/8S-GH 560 216-936 60-260 8-52 500-1000 65 3-7.5  
10/8S-G 560 180-1440 50-400 24-30 500-950 72 2.5-5  
12/10G-G 600 360-1440 100-400 10-60 400-850 65 1.5-4.5  
12/10G-GH 1200 288-2808 80-780 16-80 350-700 73 2.0-10.0  
14/12G-G 1200 576-3024 160-840 8-70 300-700 68 2.0-8.0  
16/14G-G 600 720-3600 200-1000 18-44 300-500 70 3.0-9.0  
16/14TU-G 1200 324-3600 90-1000 26-70 300-500 72 3.0-6.0  
18/16TU-G 1200 720-4320 200-1200 12-48 250-500 72 3.0-6.0





Send RFQ
1 Set