Home > products > Multistage High Pressure Pumps > D 600-60 Multistage High Pressure Pumps 280~1250 kw high efficiency

D 600-60 Multistage High Pressure Pumps 280~1250 kw high efficiency

Category:
Multistage High Pressure Pumps
Price:
USD 1000 Unit
Specifications
Material:
Cast Iron 、stainless Steel、etc
Color:
Yellow Or By Required
Port:
Tianjin、 Beijing
Flow:
450~638 M3/h
Head:
110~650 M
Speed:
2949 R/min
Motor Power:
280~1250 Kw
NPSH:
4~5.2 M
High Light:

multistage centrifugal pump

,

high pressure multistage pump

Introduction

Description

 

  • D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
  • Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
  • Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
  • Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

 

Features

  •  advanced hydraulic model, high efficiency, wide range of performance.
  •  seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  •  the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

 

Model Significance


Such as D600-60 x 6,   DF600-60×6,   DY600-60×6
D -  multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6


 


Performance

                                                         

 

                                                          D(DF/DY)600-60 Performance Parameter 

 

Level Flow Q Head Speed η shaft power Motor   Impeller Pump Moter
H n (%) N NPSHr Diameter weight weight
(m) (r/min)   (kw) (m) D (kg) (kg)
m³/h L/s         power(kw) Type   (mm)    

 

 

2     130 1480   202 280 Y3555-4   455 1750 1890
    120   238.8 (IP23/6KV)  
    110   241.8    
3     195   302.6 450 Y4003-4   1950 2640
    180   358.9 (IP23/6KV)  
    165   363.1    
4     260   403.6 560 Y4005-4   2260 2880
    240   478.5 (IP23/6KV)  
    220   483.2    
5     325   504.5 710 Y4502-4   2570 3670
    300   598.1 (IP23/6KV)  
    275        
6     390   605.3 800 Y4503-4   2880 3930
450 125 360 78 717.8 (IP23/6KV) 4
    330        
7     455   706.2 900 Y4504-4   3190 3960
600 166.6 420 82 (IP23/6KV) 4.8
    385      
8     520   807.1 1120 Y5002-4   3500 4830
638 177.2 480 79 (IP23/6KV) 5.2
    440      
9     585   908 1250 Y5003-4   3810 4930
    540   (IP23/6KV)  
    495      
10     650   1008.9 1250 Y5003-4   4120 4930
    600   (IP23/6KV)  
    550      
Send RFQ
Stock:
MOQ:
1 unit