S type single-stage double-suction centrifugal pump For fire protection system

S type single-stage double-suction centrifugal pump For fire protection system

【Uses】

S, SH single-stage double suction level in the open centrifugal pump for the delivery of water and physical and chemical substances similar to the water, the media maximum temperature of 80 ℃, the bearing body Through the cooling water pressure, can be transported below 130 ℃ hot water.

【Product description】

S, SH single-stage double suction level in the open centrifugal pump for the delivery of water and physical and chemical substances similar to the water, the media maximum temperature of 80 ℃, the bearing body into the cooling water pressure, can transport 130 ℃ below the hot water The Change the sealing ring, sleeve and impeller material, can be transported with muddy muddy water.

S series of open pump shaft seal generally use soft packing seal, plus special requirements, but also modified mechanical seal, from the motor side to see the pump, S-pump for clockwise rotation, SH-type pump for counterclockwise rotation. S, SH pump diameter of less than 300mm (including 300mm) or motor power less than 100KW, can be equipped with a common base when ordering to be explained.

【Model meaning】

250S-65A

250: pump inlet diameter of 250mm

S: single stage double suction horizontal centrifugal pump

65: head for 65m

A: Impeller first cut

【Pump structure】

Serial number Description:

1. the pump body
2. pump cover
3. pump shaft
4. impeller
5. double suction seal ring
6. bushings
7. packing sets
8. water seal tube
9. packing
10. packing ring
11. packing gland
12. sleeve nut (right)
13. bearing body
14. fixed bolts
15. bearing body gland
16. coupling parts
17. round nuts
18. bearing cover (a)
19. sleeve nut (left)
20. bearing ring
21. bearing cover (B)
22. end cover