Home > products > Mission Centrifugal Pump > 3×2×13 Mission Magnum Centrifugal Pumps 1448/1748 rpm Flow

3×2×13 Mission Magnum Centrifugal Pumps 1448/1748 rpm Flow

Mission Centrifugal Pump
USD 1000 Unit
Payment Method:
T/T, L/C, Western Union, MoneyGram
Blue、Yellow、By Required
365/420 Kg
1448/1748 Rpm
49~59 M3/h
21.9~27.9 M
High Light:

mission magnum centrifugal pumps


chemical centrifugal pump


3×2×13 Mission Magnum Centrifugal Pumps 1448/1748 rpm Flow




3×2×13 mission centrifugal sand pump is usually used as the clean water pump.


Product introduction


  • This series of pumps is fully available with mission, now we and MCM pumps, mud pumps have been developed for large power, large displacement, high pressure. Full set of American pump clay technology.
  • The mud pump delivers strong abrasion, high density, low density, high lift mud, thick wear resistant parts and heavy support. In the allowable range of pump operating pressure, the pump can be connected in series to achieve high lift.
  • Because the design parameters of the gear are unreasonable, the operation of the pump will produce greater noise, which will affect the operation of the pump. The cross head of the mud pump is made of advanced wear resistant material. It adopts special processing method without deformation, high precision and strict tolerance.
  • The series of centrifugal mud pumps and slurry pumps are fully United States technology. The pump flow is from 2 to 12". The design of this pump is better than that of ANSI B73.1 standard chemical process pump, they use barite and mineral oil base drilling mud, bentonite, brine cement slurry, cement, paper making, mine drainage and so on.
  • High chromium cast iron slurry pump, slurry pump parts, high power, large displacement, high pressure.
  • DN:1 - - 10"
  • Q: the maximum is 1400 cubic meters per hour
  • H:max142m
  • Medium temperature: 25 degrees C + 140 degrees C
  • System pressure: 25bar


Mission Centrifugal Pump Parameters
Model Discharge Capacity Head Efficiency Power speed Inlet Diameter Outlet Diameter Weight Appearance Size,mm
3×2×13 50~60m3/h 22~28m 0.65 7.5/11 kW 1450/1750rpm 3″ 2″ 365/420kg 1388×482×609



Send RFQ
1 Unit