Home > products > Clean Water Pump > IHF type Clean Water Pump luorine plastic corrosion resistant chemical pump

IHF type Clean Water Pump luorine plastic corrosion resistant chemical pump

Clean Water Pump
Payment Method:
D/A, D/P, T/T, Western Union, MoneyGram
2900, 1450 R/min
Import Diameter:
Maximum Working Pressure:
Chemicals, Pharmaceuticals, Petroleum
High Light:

high pressure water pump


industrial water pumps


Product Description


IHF-type centrifugal pump is a single-stage single-suction fluorine plastic alloy chemical centrifugal pump (referred to as IHF centrifugal pump) is based on international standards and non-metallic pump design and manufacturing process. (F46), the pump cover, the impeller and the sleeve are all made of metal insert with fluorine plastic as a whole sintered and pressed, the shaft seal adopts the exterior advanced bellows mechanical seal, static Ring with 99.9% alumina ceramic (or silicon nitride), dynamic ring using PTFE fill material, its anti-corrosion wear resistance excellent. Pumps are imported and exported are cast steel body reinforcement, to enhance the pump pressure. The actual use shows that the pump has the advantages of decay resistance, abrasion resistance, high-temperature resistance, no aging, high mechanical strength, smooth operation, advanced structure and reasonable, strict sealing performance, easy disassembly and maintenance, long service life and so on.


IHF-type fluorine centrifugal pump ┃ fluorine plastic centrifugal pump Product application:


IHF-type fluorine centrifugal pump corrosion and wear resistance has been confirmed by the actual use and the majority of users unanimously approved, has been widely used: chemical production of corrosive media delivery, ion-exchange membrane caustic soda project in the water Wastewater treatment and acid addition process (currently most of the domestic ion-exchange membrane caustic soda project pump are selected my company's products), non-ferrous metal smelting in the electrolyte transport, automobile manufacturing in the pickling process, and pharmaceutical, oil, electricity, Dyes, pesticides, paper, food, textile and other industries, in the -85 ℃ ~ 150 ℃ temperature conditions for long-term delivery of any concentration of sulfuric acid, hydrochloric acid, hydrofluoric acid, nitric acid, aqua regia, strong alkali, strong oxidants, Reducing agent and other strong corrosive media without damage, is currently the most commonly used unit of the pump one of the equipment.


IHF-type fluorine centrifugal pump ┃ fluorine plastic centrifugal pump start, run and stop:

  1. IHF centrifugal pump should be filled before filling the pump filled with the delivery of liquid, no liquid start.
  2. Close the outlet valve, turn on the power immediately after checking the pump steering must be the same as the pump steering arrows, is strictly prohibited reverse operation.
  3. IHF centrifugal pump to reach the normal speed after starting, and then gradually open the outlet valve, and adjust to the required conditions put into operation. The pump can not work for more than 3 minutes while the valve is closed on the discharge line.
  4. Shut down the valve should first be closed, and then cut off the power.


IHF-type fluorine centrifugal pump ┃ fluorine plastic centrifugal pump repair and maintenance:

  1. Check the pump and motor regularly and replace the consumable parts.
  2. Always pay attention to the bearing box filling high-quality calcium-based grease to ensure a good bearing lubrication state.
  3. Long-term downtime is not used, in addition to the pump corrosive liquid put the net, but also pay attention to the parts and pump flow channel cleaning, and cut off the power.
  4. The pump does not allow no-load operation.
  5. If the solid particles in the medium, should be added to the pump inlet filter.




Chemicals, pharmaceuticals, petroleum, metallurgy, smelting, electricity, electroplating, dyes, pesticides, paper, food, textile and other industries



IHF-type fluorine centrifugal pump ┃ fluorine plastic centrifugal pump structure:

  1. Pump body, material: HT200
  2. Impeller skeleton, material: 45 # steel
  3. Impeller, material: poly perfluoro ethylene propylene
  4. Pump body, material: lining poly perfluoro
  5. Pump cover, material: lining poly perfluoro-ethylene propylene
  6. pump cover, material: HT200
  7. machine sealing gland, material: 1Cr18Ni9Ti
  8. static ring, material: 99.9% alumina ceramic
  9. dynamic ring, material: filled with tetrafluoroethylene
  10. pump shaft, material: 3 Cr13
  11. bearing body, material: HT200
  12. coupling, material: HT200

 IHF type Clean Water Pump luorine plastic corrosion resistant chemical pump

Send RFQ
1 set