Home > products > Multistage High Pressure Pumps > D 25-50 Multistage High Pressure Pumps 15〜28 m3/h Flow 2.4~2.8 M

D 25-50 Multistage High Pressure Pumps 15〜28 m3/h Flow 2.4~2.8 M

Category:
Multistage High Pressure Pumps
Price:
USD 1000 Unit
Specifications
Material:
Cast Iron 、stainless Steel、etc
Color:
Light Green Or By Required
Port:
Tianjin、 Beijing
Flow:
15〜28 M3/h
Head:
96~618 M
Speed:
2950 R/min
Motor Power:
18.5~110 KW
NPSH:
2.4~2.8 M
High Light:

multistage centrifugal pump

,

high pressure multistage pump

Introduction

D 25-50 Multistage High Pressure Pumps 15〜28 m3/h Flow 2.4~2.8 M

 

 

 

Description

 

  • D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
  • Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
  • Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
  • Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

 

Features

  •  advanced hydraulic model, high efficiency, wide range of performance.
  •  pump running smoothly, low noise.
  •  seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  •  the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

Model Significance


Such as D600-60 x 6,   DF600-60×6,   DY600-60×6
D -  multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6


 


Performance

                                                         

 

                                                          D(DF/DY)25-50 Performance Parameter 

 

Level Flow Q Head Speed η shaft power Motor   Impeller Pump Moter
H n (%) N NPSHr Diameter weight weight
(m) (r/min)   (kw) (m) D (kg) (kg)
m³/h L/s         power(kw) Type   (mm)    
2     103 2950   9.5 18.5 Y160L-2   196 261.2 147
    100   12.6  
    96   13.5  
3     154.5   14.3 22 Y180M-2   280 180
    150   18.9  
    144   20.3  
4     206   19.1 30 Y180M-2   298.8 240
    200   25.2  
    192   27.1  
5     257.5   23.9 37 Y200L2-2   317.7 260
    250   31.5  
    240   33.9  
6     309   28.6 45 Y225M-2   336.5 325
15 4.17 300 44 37.8 2.4
    288   40.7  
7     360.5   33.4 55 Y250M-2   355.3 395
25 6.94 350 54 44.1 2.7
    336   47.5  
8     412   38.2 75 Y280S-2   374.2 500
28 7.78 400 54 50.4 2.8
    384   54.2  
9     463.5   43 75 Y280S-2   393 500
    450   56.7  
    432   61  
10     515   47.7 75 Y280S-2   411.8 500
    500   63  
    480   67.8  
11     566   52.5 90 Y280M-2   430.7 550
    550   69.3  
    528   74.6  
12     618   57.6 110 Y315S-2   449.5 875
    600   75.6  
    576   81.4  
Send RFQ
Stock:
MOQ:
1 unit