Home > products > Electric Centrifugal Pump > 40PV-SP Centrifugal Spindle Slurry Pump / Vertical Sump Pumps

40PV-SP Centrifugal Spindle Slurry Pump / Vertical Sump Pumps

Electric Centrifugal Pump
1000 USD/Set
Payment Method:
Green Or Other
Sealing Type:
Gland Seal, Expeller Seal
Bracket Form:
Drum, Suspension Frame
14.9~199.9 Kw
High Light:

high pressure slurry pump


mining slurry pump



Pump Description Standard Material Material Options
Shaft 4140 Mild Steel Available on Request
Bearing Housing Cast Iron  
Column Mild Steel  
Upper Strainer Rubber Cast Iron
Lower Strainer Cast Iron  
Back Liner 27% Chrome White Iron  
Pump Casing 27% Chrome White Iron Rubber Lined White Iron
Impeller 27% Chrome White Iron Rubber
Discharge Pipe Mild Steel Rubber Lined Mild Steel/ Composite
Adaptor Plate Mild Steel  

40PV-SPGEM Centrifugal Slurry Pump / Vertical sump pumps



  • The pump has a single shell structure, light weight, small size, easy installation and maintenance.
  • The 40 PV-SP(R)  mud pump is made of wear-resistant metal, with a single shell structure, light weight, small size, easy installation and maintenance. It can be immersed in the sink and pool work. The extended shaft (L Series) drain pump is suitable for deeper liquid operation. Add the guide bearing on the pump to make it run more smoothly.
  • The washing water should be fixed on the position of the guide bearing. They are designed for the delivery of high abrasive, large particles and high density slurries which do not require any shaft seal and seal water even if the intake is inadequate.
  • All parts of the pump are equipped with rubber gaskets for conveying non - edge abrasive slurries. And the world's famous pump exactly the same, parts can be completely interchangeable with the world's famous pump.
  • The shell is made of wear-resistant metal, and the impeller is made of abrasion resistant metal or natural rubber, polyurethane and synthetic rubber. Depending on the fluid in the tank, different shaft lengths and straw sizes can be selected.
  • Pump body material: cast iron, ductile iron, cast steel, stainless steel
  • Impeller material: bronze, cast iron, bronze / brass, stainless steel
  • Shaft material: carbon steel, stainless steel
  • Sealing rings for shell materials: bronze, cast iron, brass, stainless steel.


  • electric power
  • Sump drainage washdown    
  • metallurgy
  • Monitoring
  • environmental protection
  • Floor drainage                                                                     



Type Allowable Mating Max. Power(Kw) Range Of Performance Impeller
Capacity/Q Head/m Speed/rpm Max Efficiency/% No. of Vanes Impeller Diameter/mm
m³/hr L/S
40PV-SPGEM 15 19.44-43.2 5.4-12 4.5-28.5 1000-2200 40 5 188


SPGEM heavy duty sump pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abraisive and high density slurries from sumps, pits and other submersible sources.

-Models are available in sizes ranging from 40mm to 250mm discharge and are capable of flow rates from 5 to 350 litres per second (79-5540 USGPM) at heads of up to 40 metres (130ft). The heavy duty design of the MSP pumps allows the passage of large particles with a diameter of up to 50mm.

-Pumps will continue to operate even when the top inlet is not submerged, allowing the liquid level to to be lowered to the bottom of the sump or pit. Suction extension pipes of up to 2metres in length can be added to the bottom inlet of the pump to extend the pumping depth.

-Designed as a fixed installation the MSP provides reliable pumping performance with minimal maintenance requirements and simple servicing.



The standard SPGEM pumps feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.

Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.

Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.

SPGEM pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.

SPGEM pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.

The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.


The SPGEM Heavy Duty Sump Pumps are capable of providing reliable and efficient performance for the transfer of abraisive and high density slurries from sumps, pits and tanks in a wide range of mining, processing and heavy industrial applications.




Send RFQ
1 Set