50B-LGEM Light Low Abrasive Centrifugal Slurry Pump Horizontal Double Shell Axial Suction
heavy duty slurry pump
,mining slurry pump
50B-L Low Abrasive Centrifugal Slurry Pump horizontal double shell axial suction
Description
- L series sturdy solid mud pump bow. It employs the same design point of "" (R) and higher efficiency, the impeller plus at an attractive initial cost. Designed for rugged duties while providing greater efficiency, the L series is a combination of proven (R) unique features.
- L series solid solid mud pump bow. It employs the same design point (R) and higher efficiency, the impeller plus an attractive initial cost. The pump outlet position can be in 45 degree intervals, rotating eight different angles.
- The installation can be replaced with wear-resistant metal lining, impeller, sheath, shield and other mobile components are wear-resistant metal seal type. And driving mode, packing machinery, vice impeller seal and CR parallel belt transmission, ZVZ under the belt transmission, vertical belt drive.
- Designed for rugged tasks while providing greater efficiency, the L series is a proven (R) unique combination of features. The efficient impeller makes the L series valuable in any factory.
- L (R) mud pump is a cantilever, horizontal and centrifugal pump. It is widely used to transport corrosive, abrasive and high concentration mud. Continuous pumping of high abrasive, high density slurry, maintenance requirements minimum, can be used in tandem. The pump outlet position can be located under 45 degrees according to different requirements.
- The efficient impeller makes the L series valuable in any plant.
Applications
- Secondary Milling Circuits
- Rod mill discharge
- metallurgy,
- mining, coal,
- chemical industry,
- (R)/ZJ(R) series Metal/ Rubber Lined Horizontal Slurry Pump
- M(R) series Medium Duty Slurry Pump
- L(R)/ ZJD(R) series Low Abrasive Slurry Pump
- HH/ ZJH series High Head Slurry Pump
- SH series High Head Slurry Pump
LINERS |
IMPELLERS | CASING | BASE | EXPELLER | EXPELLER RING | SHAFT SLEEVE | SEALS | |
Standard | Chrome Alloy Natural Rubber |
Chrome Alloy Natural Rubber |
SG Iron | SG Iron | Chrome Alloy or SG Iron |
Chrome Alloy or SG Iron |
SG Iron | Rubber and Nitrile |
Options | Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon |
Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon |
SG Iron Various grades |
MS Fabricated Cast Iron |
NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151 |
NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile |
EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS |
Ceramic Stellite Chrome Oxide Nordel Neoprene Viton |
Type |
Max. Power Kw |
Clear Water Performance | Impeller | Application | |||||
Capacity m³/hr |
Head/m | Speed/rpm |
Efficiency % |
NPSH m |
Nos of Vane |
Diameter mm |
|||
50 B-LGEM | 15 | 16.2-76 | 9-44 | 1400-2800 | 55 | 3.5-8 | 5 | 190 | -Coarse tailings |
50 B-LRGEM | 15 | 12.6-60 | 6-38 | 1200-2600 | 48 | 3 | 190 | -Coarse sand | |
Product Application
The L(R) GEM series slurry pump is also called light-duty pump,which has higher rotation speed,smaller volume and less weight compared to the heavy duty slurry pump.This type of pump is adopted for transporting slurry with small particles in low density or abrasive slurry .The concentration by weight of the slurry conveyed generally does not exceed 30%.
L(R)GEM series slurry pump is used for delivering slurry with weak abrasion and low concentration for metallurgy, mines, coal and power plant, etc. L(R)GEM series slurry pump could pump the coal dust slurry, cement slurry,ceramic slurry,phosphoric acid,ash slurry,ore sand slurry,gypsum slurry, phosphorus gypsum etc.